Tein Type HG Coilover Suspension Kit - Adjustable Ride Height and Damping. Developed from TEIN's extensive experience gained in Rally competitions and support. (Picture for illustration ONLY).

 

Recommended Range of Adjustment (mm) Front = None

Recommended Range of Adjustment (mm) Rear = None

 

Notes: FOLLOWING OE PARTS ARE REQUIRED FOR INSTALLATION; FT UPPER SPRING SEAT, DUST BOOT (FOR CN9A) & BUMP RUBBER (FOR CN9A) / RR BUMP RUBBER. RR: INSULATOR NEEDS TO BE REMOVED, WHEN USING WITH OE UPPER MOUNT.

See Here for Full Specification and Here for TEIN Stock Check 

Front/Rear Spring Rate (kgf/mm): 6 / 6

Maximum Range of Adjustment (mm) Front = None
Maximum Range of Adjustment (mm) Rear = None

Electronic Damping Force Controller (EDFC) compatible: NO

Type HG is designed for rally and/or dirt trail racing. It meets the demands of any road surface with its individual compression/rebound damping force adjustment, and ride height adjustment. Utilizes a twin-tube design, and is constructed with steel for additional durability on rough courses. In order to prevent aeration that can diminish performance, a unique free piston was adapted in the construction of the HG.

Features:
    ~Steel Construction for added durability
    ~Twin Tube internal construction
    ~Ride Height adjustable via adjustable spring seats
    ~16 × 16 way adjustable dampers, compression and rebound separately adjustable
    ~External reservoirs for additional oil capacity and increased stroke
    ~3 stage powder coat
    ~Some applications utilize large diameter spring seats which allows both OEM and aftermarket springs to be used
    ~1-year Manufacturers Defect Warranty
    ~Available for Overhaul
 
Contents of Kit:
    ~Adjustable Shock Absorber × 4
    ~Main Spring × 4
    ~Upper Spring Seat Included in some applications
    ~Lower Spring Seat × 4
    ~Seat Lock × 6(8)
    ~Bump Rubber × 4
    ~Hook Spanner × 2
    ~Instruction manual

 Kit Part Number = DSR52-W1LS2